Skip to content

Book for $1 · pay after installationpay the rest after installationHow it works

Licensed & insured NSW plumber · Lic. 498555C Call or text 0452 197 452

Installation onlyUnder-Sink Filters

Bring Your Own Under-Sink Filter

$230.00 installation only installation only

Installation only
Filter Install +$230.00
Fully installed under your sink by a licensed plumber. Includes the filter tap, drain connection, all fittings, leak testing and a 12-month workmanship warranty.
Total installed, incl. GST $230.00
Extra items in the same visit are installed at a discounted rate.

Your system mounted · Standard fittings included · Flushed and leak-tested

Due at checkout$1to book

After installation$229cash or PayID, once the job is done

Each extra under-sink filter, same visit: +$149

Choose your installation day at checkout

  • You pick the day and a morning (8–12) or afternoon (12–5) window at checkout (Fridays: mornings only).
  • Another filter on the same visit? Its installation is just $149.

What you’re paying for

Everything in your $230. No hourly rate, no surprises.

  • A fully licensed and insured NSW plumber (Licence 498555C)
  • All standard fittings, tee piece, isolation valve and tubing
  • Filter tap fitted to your sink or benchtop where supplied
  • Drain saddle for reverse osmosis systems
  • System flushing, commissioning and full leak test
  • Rubbish and packaging removal
  • 12-month workmanship warrantyCovers the installation: the connections we made and the way we fitted it

What if my existing plumbing needs extra work? If additional work is needed, the plumber explains the situation and the cost before doing anything further. Nothing extra is ever charged without your approval.

About this service

Straight answers. Before you book.

Bought an under-sink water filter or reverse osmosis system? We connect the system you supply, fit its supplied drinking-water tap where applicable, then flush and leak test it. Installation is available across most of Sydney metro.

Questions about under-sink filter installation

Can you install a reverse osmosis system I supply?

Yes. This service covers under-sink reverse osmosis systems as well as compatible cartridge filter systems. The installation includes the drain connection needed for reverse osmosis.

Will you fit the drinking-water tap from my kit?

Fitting the filter tap is included where you supply it. Send us a photo of your sink or benchtop before booking if you want us to check whether the proposed position is suitable.

Is the filter flushed and tested after installation?

Yes. System flushing, commissioning and a full leak test are included, along with the standard fittings and tubing for the installation.

Read the water filter installation guide · Need a whole-home filter installed instead? · Under-sink filter installation cost guide

Under-sink water filter installation in Sydney

Bought your filter from Bunnings, Reece, Amazon or direct from the manufacturer? Perfect. You supply the system, we install it properly. One licensed plumber, one flat installation fee — shown in the price breakdown on this page — and a 12-month workmanship warranty on the finished job.

Read the full descriptionShow less

This service covers virtually every under-sink drinking water system — reverse osmosis (RO), multi-stage cartridge filters, alkaline and mineral systems, twin and triple housings, and quick-change units from brands such as Puretec, Stefani, Filter Systems Australia, Aquasana, Waterdrop and more.

What’s involved in the installation

  1. Isolate and prepare — we shut off and isolate the cold water supply under your sink and protect the cabinet before starting.
  2. Mount the unit — the housing or RO manifold is bracketed securely to the cabinet wall, upright and serviceable, so cartridges can be changed easily later.
  3. Tee into the cold supply — we install a proper compression tee and isolation valve on the cold line, so the filter can be shut off independently without turning off your kitchen.
  4. Fit the filter tap — if your kit includes a dedicated drinking tap, we drill and mount it to the sink or benchtop (stainless steel and laminate included) and run the tubing neatly.
  5. Drain connection for RO systems — reverse osmosis units need a waste line, so we fit a drain saddle or connect to the tailpiece to Australian standards.
  6. Flush and commission — new cartridges are flushed to clear carbon fines, the system is pressurised, and RO tanks are charged and checked.
  7. Leak test and tidy up — every joint is pressure checked, the cabinet is dried and cleaned, and packaging is taken away with us.

Adding a second filter system on the same visit? It is charged at a reduced rate, because the plumber is already on site. The exact figures update live in the Installation only price breakdown on this page as you change the quantity.

Why not do it yourself?

In New South Wales, connecting to your drinking water supply is regulated plumbing work. A DIY connection that later leaks can give your insurer grounds to refuse a claim, and a badly fitted RO drain line can siphon waste water back toward your drinking supply. Having it installed by a licensed plumber keeps the work compliant and your drinking water safe.

Where we install

We cover most of Sydney metro — the Inner West, Eastern Suburbs, Chatswood, St Leonards, Hornsby, the Hills, Parramatta, Blacktown, Penrith, Liverpool, Bankstown and Sutherland. Choose a day that suits you at checkout and we will come to you.

Why it has to be a licensed plumberNSW licensing rules

In NSW, water filter installation is plumbing work that must be done by a licensed plumber — and a DIY connection that later leaks can give your insurer grounds to refuse a claim. Yours is done by ours — Lic. 498555C.

Warranty: what’s coveredOur workmanship · the maker’s warranty · your ACL rights

Our 12-month workmanship warranty covers the installation: the connections we made and the way we fitted it. If something we did causes a leak or a fault, we come back and put it right at no charge.

The system you supply keeps its own manufacturer’s warranty. Your rights under Australian Consumer Law apply on top of both.

Read our Returns & warranty policy

Your installation daySeven days a week · two arrival windows (Fridays: mornings only)

Pick any available day at checkout, then a morning (8am–12pm) or afternoon (12pm–5pm) arrival window (Fridays: mornings only).

There’s no extra charge for any day or window.

Not sure it’ll fit under your sink?

Text us a photo or ask a question. You’ll talk to the team doing the work.

Installation prices & inclusions Water filter installation guide